It is used in drilling, anchorage, mini pile works in underground researches. Machine with pallets, has automatic SPT feature and can drill in every angle.

It is used in field (in-situ) experiments (SPT and Pressiometer) and sampling studies in the basic investigations and in determining the TCR, SCR, RQD values in rock environments.

The machines that enable the work in places where upper vehicles (trucks etc.) cannot enter.

In order to determine the permeability in underground strata, water injection to the well is made under pressure.

For all types of floors and soft rocks, on-site elasticity modules, bearing capacity, basic seats and different soil parameters can be calculated.

The weak motion digital broadband seismometer is a digital broadband sensor that offers unparalleled flexibility. It is a compact three component broadband device suitable for rapid deployment. The force feedback sensor is based on a proven, established design that has been in continuous production since 1987. It is used in many national seismic networks that exceed 3000 instruments distributed around the world.

Designed specifically for drilling applications, this hybrid has been combined with the Güralp 3T / 5T, the best-selling 3T broadband seismometer and the proven 5T powerful motion accelerometer. This ensures that both a weak and a distant seismic event and close range, high intensity agitation, can be monitored at the same time in a single device.

A real-time wired seismometer, completely or partly buried at the seabed at depths of up to 6000 m / 19,685 ft. All OBS systems are equipped with a magnetometer to determine device orientation in depth to maximize data quality.

It is suitable for seismology, hazard mitigation and civil engineering applications. A built-in, Linux-based receive module provides remote monitoring and control with unparalleled flexibility.

Microtremor devices are real speed meters used in microzonation and floor studies to determine floor vibration periods, ground magnification coefficient, acceleration spectrum coefficients. The speedometer is equipped with sensors that can precisely and correctly measure microtremor measurements.

Powerful motion accelerometer, used for earthquake early warning systems, structural health monitoring and vibration intensity research.

The powerful SL06 recorder has three embedded force accelerometers capable of recording high resolution seismic signals in a standard USB flash pen drive.

Synthesis The GEA Vibration Recording System provides you with great facilities for measuring and analyzing vibrations in the construction. Its superior features bring solutions for a wide range of applications from single point measurement to complex monitoring networks.

With 12-24 Channel, its the digital geophone array system developed for Seismic Refraction, Seismic Reflection Modular, MASW, REMI and Well Seismic studies.

Our high-resolution resistivity device provides detailed quantitative information about artificial flying (IP) in the ground. The potential distribution of the resulting current to the soil is measured. Underground water exploration studies, Mining, Artificial flotation (IP), Near surface geophysical imaging, Laboratory measurements, Inspection of building materials and archeology.

The SSBH well is a well geophone developed for Downhole-Crosshole applications. The SSBH sensor with two different models with 3 and 5 channels is optionally available with 4.5Hz, 8Hz or 10Hz geophones.

The GPR / ground radar is a geophysical survey method that works by sending electromagnetic waves of different frequencies to the surface and recording the waves coming back directly, reflecting or breaking in a recorder. These records form a radogram. The work is interpreted by subjecting to the radagram specific data processing program. GPR / Ground radar consists of two parts, system (recorder) and antenna. Antennas are used at different frequencies for different purposes.

Norbit is a high resolution Multi Beam Echo Sounder System. It is a system that can be installed even on small platforms thanks to its small volume and is easy to carry. It is possible to use both in the inner waters and in the seas, and it provides much lower cost compared to the system peers. With its different sensitivity motion sensor (IMU), it has various configurations depending on its type. The iWBMS model, which can be used both in the inner waters and at depths of up to 250 meters, is sufficient for many applications.

Minos X and Base X devices are systems with different speeds, depths, transmittances and hot measuring capacities at very high accuracy. Besides oceanographic measurements, it is not a system for high accuracy bathymetric measurements. Although the bar-check or depth sounder for Single Beam bathymetric measurements can be used as an alternative partly in rough work, it is a technical requirement to use this system for bathymetric measurements for all engineering calculations. In polyphase systems, the propagation of sound waves is a device of all kinds because it follows different paths in transitions between layers.

The KBS30200 and KBS200 systems are single and dual frequency integrated bathymetric measuring systems using intelligent sensors and embedded signal processing technologies. When used in conjunction with the appropriate GPS / GNSS system, it performs and manages all operations up to the time of obtaining the coordinates of the water base. Hydrographic measurements (in whole water); Underwater excavation / screening operations; The port and pier are used in the construction of bathymetric maps and underwater abrasion measurement applications.

TopoDrone 4 Scigt is a photogrammetric aircraft for photogrammetric purposes. The biggest advantage to their peers is their focus on flight safety and photogrammetry. With its integrated PPK / RTK system with very high accuracy,it is able to provide such precision without the need for floor control points.